MODEL TRACTION ENGINE CONSTRUCTION

MODEL TRACTION ENGINE CONSTRUCTION

JOHN HAINING

13,50 €
IVA incluido
En stock
Código:
14175
Idioma:
INGLES
Editorial:
SPECIAL INTEREST MODEL BOOKS
ISBN:
978-0-85242-805-4
Páginas:
112
Encuadernación:
PORTADA EN RUSTICA
Medidas:
210 mm x 148 mm
13,50 €
IVA incluido
En stock
Añadir a favoritos

A guide to glass fibre techniques and materials, concentrating on manual lay-up methods of producing laminates and mouldings, and in casting and repair work. This book also covers tools, equipment, glass fibre kits and estimating material quantities

Artículos relacionados

  • MAKING SIMPLE MODEL STEAM ENGINES
    STAN BRAY
    In this book long-time model maker Stan Bray describes the construction of a range of uncomplicated miniature steam engines, for construction by the model engineer. Single-acting oscillator to more sophisticated twin-cylinder double-acting engines are described as well as the construction of a range of boilers. The final project brings together engine and boiler into a simple s...
    En stock

    37,00 €

  • METALWORKING - TOOLS AND TECHNIQUES
    STAN BRAY
    Metalworking is written for everyone inspired by the versatility of metal. It explains the many techniques that form the basics of this craft, from traditional methods of measuring and marking out to more recent practices such as use of adhesives and inert gases for joining metals. Topics covered include: · Advice on setting up a workshop and equipment · Introduction to the qua...
    En stock

    28,00 €

  • BUILDING SIMPLE MODEL STEAM ENGINES BOOK 2
    TUBAL CAIN
    En stock

    11,50 €

  • WORKSHOP DRAWING
    TUBAL CAIN
    En stock

    13,50 € 

Array
(
    [codigo] => 14175
    [tipo_articulo] => L0
    [clasificacion] => 80
    [descripcion] => MODEL TRACTION ENGINE CONSTRUCTION
    [subtitulo] => 
    [autor] => JOHN HAINING
    [traductor] => 
    [nombre_editorial] => SPECIAL INTEREST MODEL BOOKS
    [pais] => 
    [nombre_coleccion] => 
    [es_novedad] => N
    [pvp] => 2246
    [pvp_euros] => 13.50
    [pvp_bruto] => 12.98
    [isbn] => 978-0-85242-805-4
    [ean] => 9780852428054
    [estado_libro] => 2
    [tmr] => 16.00
    [proxima_aparicion] => 0000-00-00
    [stockfirme] => 1
    [editorial] => 298
    [coleccion] => 
    [num_coleccion] => 
    [coleccion_arti] => 1
    [ancho] => 148
    [alto] => 210
    [ilustraciones] => 0
    [numero_paginas] => 112
    [formato] => PORTADA EN RUSTICA
    [tema_interes] => 114
    [origen_edicion] => 
    [fecha_edicion] => 
    [agno_ultima_edi] =>     
    [numero_edicion] => 
    [ilustrador] => 
    [ebook_codigo] => 
    [ebook_ref_gt] => 
    [ebook_size] => 
    [ebook_derechos] => 
    [ebook_permisos] => 
    [ebook_url] => 
    [ebook_num_descargas] => 
    [ebook_link_portada] => 
    [ebook_link_portada_orig] => 
    [ebook_cod_distribuidora] => 
    [ebook_permiso_venta] => 
    [ebook_paises] => 
    [ebook_formato] => 
    [ebook_drm] => 
    [ean_portada] => 9780852428054
    [idioma] => INGLES
    [precio_oferta] => 
    [cod_tema] => 114
    [tema] => MAQUINARIA HERRAMIENTA TORNOS ETC VARIOS IDIOMAS
    [titulo_alt] => 
    [subtitulo_alt] => 
    [autor_alt] => 
    [editorial_alt] => 
    [numero_paginas_alt] => 
    [pvp_euros_alt] => 
    [url_alt] => 
    [idioma_alt] => 
    [sinopsis] => 
    [nombre_portada_canonical] => 
    [unidad_min_venta] => 
    [familia] => TRACTORES AGRICOLAS  (VARIOS IDIOMAS)
    [tope_oferta] => 
    [vender] => 
    [referencia] => 
    [impuesto] => 4
    [pack] => N
    [libre_1] => 
    [link_editorial] => L2VkaXRvcmlhbC9zcGVjaWFsLWludGVyZXN0LW1vZGVsLWJvb2tzLzI5OC8=
    [pvp_euros_2decimales] => 13,50
    [ano_edicion] => 
    [descripcion_limitada] => MODEL TRACTION ENGINE CONSTRUCTION
    [titulo_completo] => MODEL TRACTION ENGINE CONSTRUCTION
    [titulo] => MODEL TRACTION ENGINE CONSTRUCTION
    [autores] => Array
        (
            [0] => Array
                (
                    [codigo] => 
                    [link_autor] => L2F1dG9yL2pvaG4taGFpbmluZy8=
                    [descripcion] => JOHN HAINING
                )

        )

    [cod_disponibilidad] => 3
    [disponibilidad] => En stock
    [class_disponibilidad] => green
    [tema_web] => Array
        (
            [link] => /libros-de/-/
        )

    [preventa] => N
    [link] => /libro/model-traction-engine-construction_14175
    [link_portada] => https://www.libromotor.com/imagenes/9780852/978085242805.JPG
    [ruta_portada] => https://www.libromotor.com/imagenes/9780852/978085242805.JPG
    [comprable] => 1
    [sinopsis_editor] => A guide to glass fibre techniques and materials, concentrating on manual lay-up methods of producing laminates and mouldings, and in casting and repair work. This book also covers tools, equipment, glass fibre kits and estimating material quantities 
    [sinopsis_breve] => A guide to glass fibre techniques and materials, concentrating on manual lay-up methods of producing laminates and m
    [sinopsis_mediana] => A guide to glass fibre techniques and materials, concentrating on manual lay-up methods of producing laminates and mouldings, and in casting and repair work. This book also covers tools, equipment, glass fibre kits and estimating material quantities 
    [precio_descuento] => 13.50
    [precio_bruto_descuento] => 12.98
    [descuento] => 0
    [tipo_descuento] => 
    [descripcion_descuento] => 
    [hayDisponible] => 1
    [indice] => 
    [atributos] => Array
        (
        )

    [relacionados] => Array
        (
            [0] => Array
                (
                    [codigo] => 19280
                    [tipo_articulo] => L0
                    [clasificacion] => 119
                    [descripcion] => MAKING SIMPLE MODEL STEAM ENGINES
                    [subtitulo] => 
                    [autor] => STAN BRAY
                    [traductor] => 
                    [nombre_editorial] => CROWOOD PRESS 
                    [pais] => 
                    [nombre_coleccion] => 
                    [es_novedad] => N
                    [pvp] => 6156
                    [pvp_euros] => 37.00
                    [pvp_bruto] => 35.58
                    [isbn] => 978-1-86126-773-3
                    [ean] => 9781861267733
                    [estado_libro] => 2
                    [tmr] => 24.00
                    [proxima_aparicion] => 0000-00-00
                    [stockfirme] => 2
                    [editorial] => 51
                    [coleccion] => 
                    [num_coleccion] => 
                    [coleccion_arti] => 1
                    [ancho] => 195
                    [alto] => 254
                    [ilustraciones] => 192
                    [numero_paginas] => 159
                    [formato] => PORTADA DURA CON CARATULA
                    [tema_interes] => 114
                    [origen_edicion] => 
                    [fecha_edicion] => 
                    [agno_ultima_edi] =>     
                    [numero_edicion] => 1
                    [ilustrador] => 
                    [ebook_codigo] => 
                    [ebook_ref_gt] => 
                    [ebook_size] => 
                    [ebook_derechos] => 
                    [ebook_permisos] => 
                    [ebook_url] => 
                    [ebook_num_descargas] => 
                    [ebook_link_portada] => 
                    [ebook_link_portada_orig] => 
                    [ebook_cod_distribuidora] => 
                    [ebook_permiso_venta] => 
                    [ebook_paises] => 
                    [ebook_formato] => 
                    [ebook_drm] => 
                    [ean_portada] => 9781861267733
                    [idioma] => INGLES
                    [precio_oferta] => 
                    [cod_tema] => 114
                    [tema] => MAQUINARIA HERRAMIENTA TORNOS ETC VARIOS IDIOMAS
                    [titulo_alt] => 
                    [subtitulo_alt] => 
                    [autor_alt] => 
                    [editorial_alt] => 
                    [numero_paginas_alt] => 
                    [pvp_euros_alt] => 
                    [url_alt] => 
                    [idioma_alt] => 
                    [sinopsis] => 
                    [nombre_portada_canonical] => 
                    [unidad_min_venta] => 
                    [familia] => MAQUINARIA, HERRAMIENTAS Y TORNOS
                    [tope_oferta] => 
                    [vender] => 
                    [referencia] => 
                    [impuesto] => 4
                    [pack] => N
                    [libre_1] => 
                    [link_editorial] => L2VkaXRvcmlhbC9jcm93b29kLXByZXNzLS81MS8=
                    [pvp_euros_2decimales] => 37,00
                    [ano_edicion] => 
                    [descripcion_limitada] => MAKING SIMPLE MODEL STEAM ENGINES
                    [titulo_completo] => MAKING SIMPLE MODEL STEAM ENGINES
                    [titulo] => MAKING SIMPLE MODEL STEAM ENGINES
                    [autores] => Array
                        (
                            [0] => Array
                                (
                                    [codigo] => 
                                    [link_autor] => L2F1dG9yL3N0YW4tYnJheS8=
                                    [descripcion] => STAN BRAY
                                )

                        )

                    [cod_disponibilidad] => 2
                    [disponibilidad] => En stock
                    [class_disponibilidad] => green
                    [tema_web] => Array
                        (
                            [link] => /libros-de/-/
                        )

                    [preventa] => N
                    [link] => /libro/making-simple-model-steam-engines_19280
                    [link_portada] => https://www.libromotor.com/imagenes/9781861/978186126773.JPG
                    [ruta_portada] => https://www.libromotor.com/imagenes/9781861/978186126773.JPG
                    [comprable] => 1
                    [sinopsis_editor] => In this book long-time model maker Stan Bray describes the construction of a range of uncomplicated miniature steam engines, for construction by the model engineer. 

Single-acting oscillator to more sophisticated twin-cylinder double-acting engines are described as well as the construction of a range of boilers. The final project brings together engine and boiler into a simple steam railway locomotive. Full drawings in both metric and imperial formats are included.

Every project in this book can be completed with a minimum of workshop tools, and they are a perfect way into model engineering for the uninitiated, and the ideal relaxation for the more experienced engineer.

 
                    [sinopsis_breve] => In this book long-time model maker Stan Bray describes the construction of a range of uncomplicated miniature steam 
                    [sinopsis_mediana] => In this book long-time model maker Stan Bray describes the construction of a range of uncomplicated miniature steam engines, for construction by the model engineer. Single-acting oscillator to more sophisticated twin-cylinder double-acting engines are described as well as the construction of a range of boilers. The final project brings together engine and boiler into a simple s
                    [precio_descuento] => 37.00
                    [precio_bruto_descuento] => 35.58
                    [descuento] => 0
                    [tipo_descuento] => 
                    [descripcion_descuento] => 
                    [hayDisponible] => 1
                )

            [1] => Array
                (
                    [codigo] => 19986
                    [tipo_articulo] => L0
                    [clasificacion] => 119
                    [descripcion] => METALWORKING - TOOLS AND TECHNIQUES
                    [subtitulo] => 
                    [autor] => STAN BRAY
                    [traductor] => 
                    [nombre_editorial] => CROWOOD PRESS 
                    [pais] => 
                    [nombre_coleccion] => 
                    [es_novedad] => N
                    [pvp] => 4659
                    [pvp_euros] => 28.00
                    [pvp_bruto] => 26.92
                    [isbn] => 978-1-86126-573-9
                    [ean] => 9781861265739
                    [estado_libro] => 0
                    [tmr] => 24.00
                    [proxima_aparicion] => 0000-00-00
                    [stockfirme] => 1
                    [editorial] => 51
                    [coleccion] => 
                    [num_coleccion] => 
                    [coleccion_arti] => 1
                    [ancho] => 189
                    [alto] => 246
                    [ilustraciones] => 164
                    [numero_paginas] => 176
                    [formato] => PORTADA DURA CON CARATULA
                    [tema_interes] => 114
                    [origen_edicion] => 
                    [fecha_edicion] => 
                    [agno_ultima_edi] =>     
                    [numero_edicion] => 1
                    [ilustrador] => 
                    [ebook_codigo] => 
                    [ebook_ref_gt] => 
                    [ebook_size] => 
                    [ebook_derechos] => 
                    [ebook_permisos] => 
                    [ebook_url] => 
                    [ebook_num_descargas] => 
                    [ebook_link_portada] => 
                    [ebook_link_portada_orig] => 
                    [ebook_cod_distribuidora] => 
                    [ebook_permiso_venta] => 
                    [ebook_paises] => 
                    [ebook_formato] => 
                    [ebook_drm] => 
                    [ean_portada] => 9781861265739
                    [idioma] => INGLES
                    [precio_oferta] => 
                    [cod_tema] => 114
                    [tema] => MAQUINARIA HERRAMIENTA TORNOS ETC VARIOS IDIOMAS
                    [titulo_alt] => 
                    [subtitulo_alt] => 
                    [autor_alt] => 
                    [editorial_alt] => 
                    [numero_paginas_alt] => 
                    [pvp_euros_alt] => 
                    [url_alt] => 
                    [idioma_alt] => 
                    [sinopsis] => 
                    [nombre_portada_canonical] => 
                    [unidad_min_venta] => 
                    [familia] => MAQUINARIA, HERRAMIENTAS Y TORNOS
                    [tope_oferta] => 
                    [vender] => 
                    [referencia] => 
                    [impuesto] => 4
                    [pack] => N
                    [libre_1] => 
                    [link_editorial] => L2VkaXRvcmlhbC9jcm93b29kLXByZXNzLS81MS8=
                    [pvp_euros_2decimales] => 28,00
                    [ano_edicion] => 
                    [descripcion_limitada] => METALWORKING - TOOLS AND TECHNIQUES
                    [titulo_completo] => METALWORKING - TOOLS AND TECHNIQUES
                    [titulo] => METALWORKING - TOOLS AND TECHNIQUES
                    [autores] => Array
                        (
                            [0] => Array
                                (
                                    [codigo] => 
                                    [link_autor] => L2F1dG9yL3N0YW4tYnJheS8=
                                    [descripcion] => STAN BRAY
                                )

                        )

                    [cod_disponibilidad] => 3
                    [disponibilidad] => En stock
                    [class_disponibilidad] => green
                    [tema_web] => Array
                        (
                            [link] => /libros-de/-/
                        )

                    [preventa] => N
                    [link] => /libro/metalworking-tools-and-techniques_19986
                    [link_portada] => https://www.libromotor.com/imagenes/9781861/978186126573.JPG
                    [ruta_portada] => https://www.libromotor.com/imagenes/9781861/978186126573.JPG
                    [comprable] => 1
                    [sinopsis_editor] => Metalworking is written for everyone inspired by the versatility of metal. It explains the many techniques that form the basics of this craft, from traditional methods of measuring and marking out to more recent practices such as use of adhesives and inert gases for joining metals. 

Topics covered include: · Advice on setting up a workshop and equipment · Introduction to the qualities of metals · Working with the metal · Drills and drilling · Threads · Shaping and joining metal · Machines 

With over 200 llustrations, the clear text shows you how to use these techniques and offers tips on their application.
 
                    [sinopsis_breve] => Metalworking is written for everyone inspired by the versatility of metal. It explains the many techniques that form
                    [sinopsis_mediana] => Metalworking is written for everyone inspired by the versatility of metal. It explains the many techniques that form the basics of this craft, from traditional methods of measuring and marking out to more recent practices such as use of adhesives and inert gases for joining metals. Topics covered include: · Advice on setting up a workshop and equipment · Introduction to the qua
                    [precio_descuento] => 28.00
                    [precio_bruto_descuento] => 26.92
                    [descuento] => 0
                    [tipo_descuento] => 
                    [descripcion_descuento] => 
                    [hayDisponible] => 1
                )

            [2] => Array
                (
                    [codigo] => 12812
                    [tipo_articulo] => L0
                    [clasificacion] => 119
                    [descripcion] => BUILDING SIMPLE MODEL STEAM ENGINES BOOK 2
                    [subtitulo] => 
                    [autor] => TUBAL CAIN
                    [traductor] => 
                    [nombre_editorial] => SPECIAL INTEREST MODEL BOOKS
                    [pais] => 
                    [nombre_coleccion] => 
                    [es_novedad] => N
                    [pvp] => 1913
                    [pvp_euros] => 11.50
                    [pvp_bruto] => 11.06
                    [isbn] => 978-1-85486-147-4
                    [ean] => 9781854861474
                    [estado_libro] => 2
                    [tmr] => 16.00
                    [proxima_aparicion] => 0000-00-00
                    [stockfirme] => 1
                    [editorial] => 298
                    [coleccion] => 
                    [num_coleccion] => 
                    [coleccion_arti] => 1
                    [ancho] => 150
                    [alto] => 210
                    [ilustraciones] => 0
                    [numero_paginas] => 0
                    [formato] => PORTADA EN RUSTICA
                    [tema_interes] => 114
                    [origen_edicion] => 
                    [fecha_edicion] => 
                    [agno_ultima_edi] =>     
                    [numero_edicion] => 
                    [ilustrador] => 
                    [ebook_codigo] => 
                    [ebook_ref_gt] => 
                    [ebook_size] => 
                    [ebook_derechos] => 
                    [ebook_permisos] => 
                    [ebook_url] => 
                    [ebook_num_descargas] => 
                    [ebook_link_portada] => 
                    [ebook_link_portada_orig] => 
                    [ebook_cod_distribuidora] => 
                    [ebook_permiso_venta] => 
                    [ebook_paises] => 
                    [ebook_formato] => 
                    [ebook_drm] => 
                    [ean_portada] => 
                    [idioma] => INGLES
                    [precio_oferta] => 
                    [cod_tema] => 114
                    [tema] => MAQUINARIA HERRAMIENTA TORNOS ETC VARIOS IDIOMAS
                    [titulo_alt] => 
                    [subtitulo_alt] => 
                    [autor_alt] => 
                    [editorial_alt] => 
                    [numero_paginas_alt] => 
                    [pvp_euros_alt] => 
                    [url_alt] => 
                    [idioma_alt] => 
                    [sinopsis] => 
                    [nombre_portada_canonical] => 
                    [unidad_min_venta] => 
                    [familia] => MAQUINARIA, HERRAMIENTAS Y TORNOS
                    [tope_oferta] => 
                    [vender] => 
                    [referencia] => 
                    [impuesto] => 4
                    [pack] => N
                    [libre_1] => 
                    [link_editorial] => L2VkaXRvcmlhbC9zcGVjaWFsLWludGVyZXN0LW1vZGVsLWJvb2tzLzI5OC8=
                    [pvp_euros_2decimales] => 11,50
                    [ano_edicion] => 
                    [descripcion_limitada] => BUILDING SIMPLE MODEL STEAM ENGINES BOOK 2
                    [titulo_completo] => BUILDING SIMPLE MODEL STEAM ENGINES BOOK 2
                    [titulo] => BUILDING SIMPLE MODEL STEAM ENGINES BOOK 2
                    [autores] => Array
                        (
                            [0] => Array
                                (
                                    [codigo] => 
                                    [link_autor] => L2F1dG9yL3R1YmFsLWNhaW4v
                                    [descripcion] => TUBAL CAIN
                                )

                        )

                    [cod_disponibilidad] => 3
                    [disponibilidad] => En stock
                    [class_disponibilidad] => green
                    [tema_web] => Array
                        (
                            [link] => /libros-de/-/
                        )

                    [preventa] => N
                    [link] => /libro/building-simple-model-steam-engines-book-2_12812
                    [link_portada] => https://www.libromotor.com/images/NOportada.jpg
                    [link_portada_grande] => https://www.libromotor.com/images/NOportada.jpg
                    [ruta_portada] => https://www.libromotor.com/images/NOportada.jpg
                    [comprable] => 1
                    [sinopsis_editor] => 
                    [sinopsis_breve] => 
                    [sinopsis_mediana] => 
                    [precio_descuento] => 11.50
                    [precio_bruto_descuento] => 11.06
                    [descuento] => 0
                    [tipo_descuento] => 
                    [descripcion_descuento] => 
                    [hayDisponible] => 1
                )

            [3] => Array
                (
                    [codigo] => 13002
                    [tipo_articulo] => L0
                    [clasificacion] => 119
                    [descripcion] => WORKSHOP DRAWING
                    [subtitulo] => 
                    [autor] => TUBAL CAIN
                    [traductor] => 
                    [nombre_editorial] => SPECIAL INTEREST MODEL BOOKS
                    [pais] => 
                    [nombre_coleccion] => 
                    [es_novedad] => N
                    [pvp] => 2246
                    [pvp_euros] => 13.50
                    [pvp_bruto] => 12.98
                    [isbn] => 978-1-85486-182-5
                    [ean] => 9781854861825
                    [estado_libro] => 2
                    [tmr] => 16.00
                    [proxima_aparicion] => 0000-00-00
                    [stockfirme] => 2
                    [editorial] => 298
                    [coleccion] => 
                    [num_coleccion] => 
                    [coleccion_arti] => 1
                    [ancho] => 150
                    [alto] => 210
                    [ilustraciones] => 0
                    [numero_paginas] => 0
                    [formato] => PORTADA EN RUSTICA
                    [tema_interes] => 114
                    [origen_edicion] => 
                    [fecha_edicion] => 
                    [agno_ultima_edi] =>     
                    [numero_edicion] => 
                    [ilustrador] => 
                    [ebook_codigo] => 
                    [ebook_ref_gt] => 
                    [ebook_size] => 
                    [ebook_derechos] => 
                    [ebook_permisos] => 
                    [ebook_url] => 
                    [ebook_num_descargas] => 
                    [ebook_link_portada] => 
                    [ebook_link_portada_orig] => 
                    [ebook_cod_distribuidora] => 
                    [ebook_permiso_venta] => 
                    [ebook_paises] => 
                    [ebook_formato] => 
                    [ebook_drm] => 
                    [ean_portada] => 
                    [idioma] => INGLES
                    [precio_oferta] => 
                    [cod_tema] => 114
                    [tema] => MAQUINARIA HERRAMIENTA TORNOS ETC VARIOS IDIOMAS
                    [titulo_alt] => 
                    [subtitulo_alt] => 
                    [autor_alt] => 
                    [editorial_alt] => 
                    [numero_paginas_alt] => 
                    [pvp_euros_alt] => 
                    [url_alt] => 
                    [idioma_alt] => 
                    [sinopsis] => 
                    [nombre_portada_canonical] => 
                    [unidad_min_venta] => 
                    [familia] => MAQUINARIA, HERRAMIENTAS Y TORNOS
                    [tope_oferta] => 
                    [vender] => 
                    [referencia] => 
                    [impuesto] => 4
                    [pack] => N
                    [libre_1] => 
                    [link_editorial] => L2VkaXRvcmlhbC9zcGVjaWFsLWludGVyZXN0LW1vZGVsLWJvb2tzLzI5OC8=
                    [pvp_euros_2decimales] => 13,50
                    [ano_edicion] => 
                    [descripcion_limitada] => WORKSHOP DRAWING
                    [titulo_completo] => WORKSHOP DRAWING
                    [titulo] => WORKSHOP DRAWING
                    [autores] => Array
                        (
                            [0] => Array
                                (
                                    [codigo] => 
                                    [link_autor] => L2F1dG9yL3R1YmFsLWNhaW4v
                                    [descripcion] => TUBAL CAIN
                                )

                        )

                    [cod_disponibilidad] => 2
                    [disponibilidad] => En stock
                    [class_disponibilidad] => green
                    [tema_web] => Array
                        (
                            [link] => /libros-de/-/
                        )

                    [preventa] => N
                    [link] => /libro/workshop-drawing_13002
                    [link_portada] => https://www.libromotor.com/images/NOportada.jpg
                    [link_portada_grande] => https://www.libromotor.com/images/NOportada.jpg
                    [ruta_portada] => https://www.libromotor.com/images/NOportada.jpg
                    [comprable] => 1
                    [sinopsis_editor] => 
                    [sinopsis_breve] => 
                    [sinopsis_mediana] => 
                    [precio_descuento] => 13.50
                    [precio_bruto_descuento] => 12.98
                    [descuento] => 0
                    [tipo_descuento] => 
                    [descripcion_descuento] => 
                    [hayDisponible] => 1
                )

        )

    [variantes] => Array
        (
        )

)